Güde GRK 250/300 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spareparte for Güde GRK 250/300. Cant be Orderd anymore so I modeld it
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement Saw Blade Guard for Güde GRK 250/300
This is a custom-designed replacement for the blade cover/guard on a Güde GRK 250/300 mitre saw. Modeled in Fusion 360, this part is intended to replace the original clear plastic guard if it has cracked or broken.
Proven Print Settings
I have successfully printed and used this part with the following settings:
Material: PLA (Works great and provides the necessary rigidity).
Walls/Perimeters: 3 Walls (Provides good structural strength for the pivot points).
Infill: 20% (Offers a good balance of strength and print time).
Supports: Yes (Necessary for the overhanging mounting areas).
Installation Tips
Carefully remove all support material, especially inside the hinge area.
Mount using the original hardware.
Safety Check: Before plugging in the saw, manually lower the blade to ensure the guard retracts smoothly and doesn't touch the teeth.
Compatibility
proven for Güde GRK 250/300
If you find this part useful, please consider posting a Make!