Spoiler Fiamma 45S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoiler for Fiamma 45S
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🚐 Fiamma Awning AeroSpoiler | Silence & Style
Tired of that annoying wind whistle during your highway trips? Or maybe you find your awning's look a bit too "boxy"?
This AeroSpoiler is specifically designed for Fiamma awnings (F45/F80 series) to create a seamless integration between your vehicle and the accessory. It’s not just an aesthetic upgrade—it’s a functional improvement for your road trips.
🚀 Why Download It?
Goodbye Wind Noise: The optimized shape deflects airflow over and around the awning end-cap, drastically reducing cabin wind noise.
Aerodynamic Efficiency: Reduces drag, helping to stabilize airflow at high speeds.
Integrated Design: Transforms the squared-off awning line into a modern, sleek profile.
Extra Protection: Acts as an additional shield against branches or debris that might strike the front mechanism.
🎨 Professional Finish & Painting (Highly Recommended)
For a truly professional result, I highly recommend painting the part after printing. Painting the spoiler isn't just for looks—it offers key technical advantages:
Factory Look: By using a spray paint that matches your awning (e.g., Fiamma Polar White or Titanium), the spoiler will look like an original factory component.
UV Protection: Paint creates a protective barrier that prevents the plastic from degrading, yellowing, or becoming brittle under the summer sun.
Smooth Surface: A light sanding followed by primer and paint will hide the print layer lines, making the surface perfectly aerodynamic and much easier to clean from bugs.
🛠 Print Settings
To ensure the spoiler survives the sun, rain, and highway speeds, use these parameters:
Parameter | Suggested Value |
|---|---|
Material | ASA or PETG (Avoid PLA: it will warp in the sun) |
Infill | 20-30% (Gyroid for maximum structural strength) |
Walls | 3-4 for optimal durability |
Supports | Required only for the mounting clip area (see 3MF file) |
🔧 Installation
Installation is straightforward:
Preparation: Thoroughly clean the awning end-cap surface with alcohol.
Fixing: Use extra-strong double-sided tape (like 3M VHB) or, for ultimate security, a bead of polyurethane sealant (e.g., SikaFlex).
Positioning: Snap the spoiler into place and apply firm pressure to ensure a permanent bond.
Do you like this project? If it helped make your travels quieter, please upload a photo of your make and leave a rating! 📸
Take a look at my other camper solutions.