MeganeX Superlight 8K Goggle Style Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom goggle style gasket for the Shiftall MeganeX 8K (MK1, but might work with MK2).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations with pre-set halo mount distance (D1-4). See attached photos for the corresponding distance setting on the original hinge (Note: these are rough and may vary slightly)
I also included a version with a bracket for the 5M Shiftall optical cable connector. Once printed, you may need to file or sand the internal walls of the bracket slightly to fit the connector as the tolerance is tight.
This gasket works best when combined with the original Shiftall soft strap AND the Razer Quest 2/3 soft strap, with the Shiftall strap attached to the side brackets and Razer to the halo mount.
Parts needed:
2x - M3 x 5/6mm screws
1x - M3 x 5mm x 4.5mm threaded insert