FritzBox 5690 Fiber, 7690, 7590 ax mount | FRITZ!Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to attach a bigger FritzBox (ca. 254 x 191 x 63 mm) to the wall or under a desk.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the wrong FritzBox! model.
So I designed my own version with holes on the side to save filament. Another feature is the open back so the Fritzbox can be taken out after screwing the holder in place. Maybe the small rim helps to "click" it in, but this has not been tested yet.
The quick and dirty FreeCAD files are attached in case someone wants to adjust something.
I printed everything in black PETG pro in 0.28 mm Superdraft mode with 5 % lightning infill. Originally this was planned as a test version but turned out strong and well looking. So the opposite side was printed with this settings too.
