Parametric Fiber starter pot holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for Fiberpotter biodegradable pots with two options a bottom and mid carrier.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Summary
This is a holder for multiple Fiberpotter cardboard pots. The have a bottom diameter of 5cm and a top diameter of 8 cm. It comes in two variants: base and midsection.
Printing
I don't think it especially matters what filament you use as long as it is stiff. I used a gray PLA but PETG and ABS/ASA should work just fine. As for orientation, for the midsection plate it should not matter as long as it is parallel to the build plate. For the base option it may be in theory cleaner to print it with the bottom of the holder on the build plate; However since the inside bottom is covered by the pot I would suggest printing it with the top on the build plate and have the bottom of the cups be bridged.
Parametric
If you don't want the 2x2 options provided go to OnShape, and change the values in the top right to the number of pots you want in the length and width, then export from the style you want.
