Smooth Bruticus headphone hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5QDF91YtDBi The hanger is 45mm…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5QDF91YtDBi
The hanger is 45mm from the hook to the lip that stops the headphones from slipping off. The gap is designed to be 13mm, which fit my 12.3mm desk wall near-perfectly after accounting for shrinkage.
My Tinkercad page has several variations, sizes, and with separated parts to allow resizing for your desk or workspace
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
10%
Filament: Hatchbox PLA Orange
Notes:
I printed this with minimal infill, grid pattern, 10% overlap. 3 walls (top, bottom, and walls), and optimized for Walls in Cura 4. 1.2mm wall thickness, .2mm initial layer, .4mm layer height. Printed at 195C extruder, 50C bed. Skirt w/ 2 lines to prime the extruder.
Category: 3D Printing