Clampy Clamp v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A low-profile 3d printed clamp that's quite versatile as far as positioning. For each clamp, print:
1x curved-clamp.stl
1x flat-clamp.stl
2x pivoting-clamp-toggle.stl
You'll also need 1x M5 socket head cap bolt (I use 80mm, but larger ones will allow you to clamp larger items at the expense of clamp profile size), and 1x M5 wingnut per clamp:
80mm bolts:
https://www.amazon.com/gp/product/B08VD4VVSY/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
wingnuts:
https://www.amazon.com/gp/product/B07QG87ZN3/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I recommend to print as they are already laid out on the bed with supports on flat and curved clamp. This will result in a stronger part.
I also recommend printing out of PETG, ASA, or ABS due to the impact absorption properties on those filaments.
Happy clamping!