1 / 3
Remix: Set screw relocation - Adjustable Sink Bridge and Whetstone Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moved set screw location to allow for screw length of ~14mm or greater without interfering with stone placement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These changes do increase the amount of material required and print time of course. Ideally, I would have reduced the height of the top face(s) an equal amount to keep overall height the same, but I was working from the .step file in Fusion since I'm not familiar with OnShape. It would have been possible, but slightly more work than I was willing to put into it at the time.
Credit to @wigglememore for the great design!