Sir Radzig's Sword - OneBlade Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sir Radzig's Sword Wrapped around Philips OneBlade
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello, i made this amazing sword wrapped around Philips OneBlade as a nice stand. inspired by Sir Radzig's Sword from Kingdom Come Deliverance 2.
Printing order and assembly instructions video:
Printing Order and informations:
i recommend using 25-30mm M3 screws to reinforce the threads ( 4 screws in total ), but even without them it will still work.
Print with support (a little bit is needed at the base) :
Grip1.STL
Grip2.STL
Print with 4 wall loops, (some strength is recommended in this one):
Grip Screw.STL
This one is optional, but holding the sword without it is impossible, highly recommend it to have some fun while you wait for base to print:
Optional Blade.STL
Print with 2 wall loops, 15% infill:
Guard.STL x2
Grip Ring 1.STL
Grip Ring 2.STL
Grip Ring 3.STL
Cap.STL
Pommel.STL
Some extra strength would be nice where the thread is, but using 15% infill and 2 wall loops should be enough:
Base.STL
Render picture with OneBlade from here: