Square Stability Base Kit (Weighted & Standard Versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
75x75mm base kit for decorative roses. Includes weighted M10 ballast version (113g) and a standard non-weighted version.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a universal 75x75mm stability mount designed to add a solid foundation to top-heavy decorative prints. While it works for various models, it was specifically custom-fitted for the Rose Decor by 29flo to prevent it from tipping over on a desk or shelf.
This kit includes two versions:
Weighted Ballast Version: Features four internal cavities designed to house four M10 hex nuts. This adds approximately 46g of hidden weight, bringing the total assembly to ~113g.
Standard Version: A solid-footprint version for those who want the look and added surface area without the extra hardware.
Technical Specifications
Dimensions: 75mm x 75mm x 15mm
Wall Thickness: 3.4mm for high structural integrity.
Ballast: Optimized for 4x M10 Hex Nuts.
Print Settings & Assembly
Printer: Optimized for Flashforge Adventurer 5M (AD5M).
Infill: 80% Gyroid recommended for the weighted version to provide maximum internal support and weight.
Material: PLA or PETG.
The "Nut Drop" (Weighted File Only): * The weighted model includes a pre-set "Pause at Height" command at approximately 11.4mm.
When the printer pauses, simply drop your four M10 nuts into the corner cavities.
Ensure they sit flush or slightly below the current layer so the nozzle clears them when you hit resume. The printer will then "ceiling" over the nuts, sealing them permanently inside.
Compatibility
Specifically designed to fit the square footprint of the Rose Decor. Please note: This is a standalone accessory and not a remix of the original file.
Open Source
This model is licensed under CC BY. I encourage the community to remix, modify, and improve this base to fit other hardware or decorative models!