Muzi Works Super IO Case

As of yet, I was unable to find a case for the Super IO by Muzi, so I decided to set out and make one myself. I used the CAD file provided on the website for the board and modeled a case using Shap3rd. This is what I came up with. Fully functional with the buttons, internal 2.4ghz antenna and SMA whip antenna for 915mhz, GPS antenna, access to the USB C port and side switch. I even added small light pipes for the three LED's for heart beat, charge and message notification. The Super IO comes with the GPS Antenna and the internal antenna for 2.4ghz and the OLED screen with mounting bracket. I purchased a Whip antenna from Muzi for 915mhz. I also used the 1500mA Li-Poly battery that fits perfectly between the standoffs that the board gets mounted to with (5) five of the M2 screws that come with the boards. The case is held together with (4) Four M3x6 screws.

This was printed on a Creality CR-6SE using Overture PETG. 

• Nozzle Temp: 240C

• Bed Temp: 80C

• Bed Prep: Blue Painters Tape

• Print Quality: 0.2mm

• Infill: 20% Gyroid

• Print Speed: 40mm/s

• Travel Speed: 100mm/s

• Retraction: 1mm @ 40mm/s

• Cooling: 25% fan speed after first 4 layers

Print one top, one bottom and six buttons. I printed bottom case with the back touching the build plate. I printed the top case with the face up. Buttons can be printed with the brim touching the build plate.

I plan to do another version of this case with a second SMA connector for a second whip antenna tuned for 2.4ghz. As time permits, I will also be adding a pole mounted solar node version and magnetic mounted car node. Stay tuned and Happy Printing!