Ubiquiti Unifi Cloudkey G2 Standard and Plus Rack Bracket Remix of a Remix Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unifi Cloud Key Gen 2 Standard and Plus model Rack Brackets. They can be reversed for the left side.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Unifi Cloud Key Gen 2 Standard and Plus model Rack Brackets. They can be reversed for the left side.
Loved the design but I have a Plus model, so here is a remix of a remix.
Modifications:
Increased width to fit Cloudkey Plus model
Increased shell thickness for added rigidity
Removed LED cutout
Modified mounting holes to reduce wobbling
Created a version with a keystone slot
I remixed a standard model with just the changes to the mounting holes and an option for a keystone slot.
Standard models are untested as I only have a Plus model. I did not change any of the interior dimensions so it should work. Please post a make if it works for you.
Print with PETG or better for the higher heat tolerance.
Insert Cloud Key from the back and do not force it through the tabs or they might snap. Use fingers or a small screw driver if needed to bend them out of the way slightly. They should go around the body and snap into the holes on the side of the Cloud Key.