Front Air Filter Housing for use on a K2 or later Honda CT90
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a front air filter housing I designed for use on K2 or later Honda CT90's
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a front air filter housing I designed for use on K2 or later Honda CT90 motorcycles. The housing is an assembly composed of the three parts I have included with this model. The upper and lower mounts slide into mating grooves that are integral to the front housing. I designed the grooves to be a very snug fit so that the mounts won't work out on their own, but if they are ever damaged the mounts are still able to be removed and replaced.
The front housing .stl also includes a designed in removable fin to minimize the support material required.
I would also recommend that the front and rear mounts be printed with 100% infill as these features are what is used to bolt the air filter housing to the CT90 and will be less likely to be damaged.