Casement Window Stay / Restrictor (Snap-Together Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-together casement window stay/restrictor. 137 mm length, two hook options. No extra fasteners needed.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D-printable casement window stay (restrictor) that holds the window in a slightly open position for ventilation while preventing full opening.
The design requires no additional bolts, pins, or fasteners for assembly — all parts snap together. Print the components, assemble by snapping, and mount to the window frame using standard screws.
Two hook variants are included to match different frame configurations.
Lever + Mounting Plate combined length: 137 mm.
Specifications
Total Length (Lever + Plate): 137 mm
Function: Holds casement window in a fixed partially open position
Components: Lever, mounting plate, two hook options
Assembly: Snap-fit, no extra hardware needed
Mounting: Standard screws (not included)
Material Recommendations
PETG: Recommended for durability and weather resistance outdoors.
ASA: Preferred for direct sun exposure (high UV stability, low warping).
Infill: 40%+ recommended; 4+ perimeters for strength.
Notes & Assembly
Snap Assembly: Parts click together without tools or pins.
Installation: Mount plate to frame, hook to window; adjust position as needed.
Support-free: Designed for FDM printing with minimal or no supports.
Hardware: Use appropriate countersunk screws for your frame material.