Mini Flashlightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These mini lightsaber shaped flashlights are very bright and only cost around $1 in material to make.
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
I was really impressed with these little single LED lights(aff.) I found on amazon. They are even better paired with these lenses for a more focused light. I modified my mini collapsing lightsaber to make a mini Flashlightsaber. They are very bright and only cost around $1 in material to make.
It all press fits together without glue. Turning the emitter shield one turn will cause the light to turn on/off. Caution, if you turn it too much it will sperate and allow the battery/led to fall out. It can also still turn on while its being shipped or while its moving around so I made a slot in the hilt to re-insert the battery insulator.
The STL's are split for multi-color printing without supports but you can also join the files and print with one color or do manual filament swaps at layer heights for more color. There are different STL's for the emitter depending on if you are using a lens.
Assembly Video
Printed on the Prusa XL(aff.) with Polymaker Metallic Pro PLA