3M 200ml Pneumatic Dispenser Hose Retainer (Panel Bond / Seam Sealer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tape-mounted retainer for the spray hose accessory on 3M 200ml pneumatic adhesive guns. Keeps the hose secured with a cl
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Best way to say thanks? Post a make.
3M 200ml Pneumatic Dispenser Hose Retainer (Panel Bond / Seam Sealer)
This is a mounting retainer accessory for the 3M 200ml pneumatic dispenser gun used with panel bond adhesive, seam sealer, epoxy, and other 2-part materials.
When using the optional spray hose attachment (instead of dispensing directly from the static mixer), the hose and elbow fitting tend to hang loose when not in use. This print provides a clean, secure way to retain the hose assembly against the body of the gun so it stays organized and protected between uses.
Mounting Method
This retainer is not a snap-on part.
It is mounted using ½" 3M double-sided automotive tape (VHB or standard 3M attachment tape).
Anyone running this gun in a collision shop likely already has the tape in stock.
Once taped in place, the mount is extremely secure.
Retention Action
The hose assembly itself snaps into the printed retainer with a very satisfying, positive snap.
Firm retention
Clean “click” engagement
Easy but intentional removal
It holds securely during storage but removes instantly when you need to spray.
Printing Details
Printed vertically
Tree supports required
0.4mm nozzle
0.16mm layer height
PLA tested
PETG recommended for shop durability
Vertical orientation gives better strength across the snap arms.
Photos show:
One installed
One raw print
One with tree supports still attached
Material Recommendation
For collision shop use:
PETG – Recommended (chemical resistance + impact durability)
PLA – Works fine in mild environments
Avoid brittle materials if your shop runs cold.
Installation
Apply ½" 3M double-sided tape to the back surface.
Clean gun housing with alcohol.
Press retainer firmly in place.
Allow tape to bond fully.
Snap hose assembly into the cradle.
Designed for:
3M 200ml pneumatic applicator guns
Panel bond adhesives
Seam sealers
2-part structural adhesives
If you remix or improve it, feel free to share.