Tesla Model 3 NA/USA Rear License Plate bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces Tesla part# 1096844-00-B
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Open Community License v1
The dealer I bought my Model 3 from put a self tapper in one of the holes for the license plate which destroyed my license plate bracket. I didn't like the stock inserts, so I modelled this up from the one on my car. Provided are versions for 8mm and 10mm threaded inserts. Insert them from the flat side of the part. Attaches to the car with the stock 2 self tappers and then M5x8 or M5x10 stainless bolts for the license plate. Should fit any Model 3 or Y that use the bracket for the rear license plate, but I have not verified this.
I printed mine from PETG, 0.2mm layer height, 20% infill, 3 perimeters.