iwata airbrush pistol-grip handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pistol-grip handle attachement for iwata airbrush (HP-CR, might work on other models).
- Ocena
- 4,864 / 5
- Polubienia
- 360
- Pobrania
- 1742
- Wydruki
- 23
- Wyświetlenia
- 6740
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the grip, as well as chamfers instead of fillets to allow for better 3D printing without support.
Printed i prusament PETG with standard mini (0.40) nozzle, using 0.20 layer height at 15% infill without support. Approximately 1h print time.
Update: 2024-11-06
Added models (with and without logo) with different hole diameter (11.0mm - 13.0mm). The model is originally made with dimension for the Iwata HP-CR Revolution airbrush and the different sized models have only been modified on the hole diameter for the airbrush.