Pebble Charging Stand (Core Devices Dongle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging stand designed for the USB C <-> Pebble charging dongle that comes with new (2025 and later) Pebble watches.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a stand to charge my new Pebble 2 Duo, but the watch only came with a USB C -> Pebble adapter dongle. This stand fits the dongle and turns it into a proper stand for your watch! There's both a double-leg version, and a single leg version that supports straps that don't fully separate.
This stand is a designed to use the Anker USBC Right Angle Cable, but mostly any USB C cable will work. There's a groove inside the model to guide the cable out the back of the stand. If you want to remove the dongle for any reason, the keychain loop is still available, and the detent in the stand allows it to be removed with a small tug.
Recommended to be printed on the left side, as shown in the slicer screenshot. Definitely requires some support in this orientation, but I found that it prints the best this way.
Both STEP and FreeCAD files are attached, feel free to modify and adapt to your whim!