1 / 1
Spool Holder with 2 HX711 Sensors and ESP32 (MH-ET Live)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoolholder with measurement of 2 Spools (up to 5 kg)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hold 2 Spools up to 5 kg and measure the weight of each spool seperate. You need 2 HX711 Sensors with 2 Boards and a MH-ET Live board. Software for the MH-ET Live is currently ESPHome to gather the data to HomeAssistant and calcualte there the amount left. inner Spool Diameter should be between 36 and 52 mm