1 / 8
Animatronic Endo 02 From Five Nights At Freddys — zdjęcie 1
1 / 8

Animatronic Endo 02 From Five Nights At Freddys

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A functional animatronic Endo 02 from Five Nights At Freddys 2

Ocena
0 / 5
Polubienia
10
Wydruki
0
Wyświetlenia
319
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

I do not own any rights to Five Nights At Freddy's at all. Scott Cawthon is the creator not me. I'm not very good with sharing instructions so I will like a Youtube Video on how I assembled him. If you find any problems with the model let me know and I will fix the model as soon as possible. Note: my models aren’t perfect so I can try and help or fix any error you might occur.

Supply's Needed:
-4 Micro Servos
-1 MG 996R Servo
-3 Paper Clips
-Super/Hot Glue
-Spray Paint & Acrylic Paint

Types Of Screws Needed:
-4 SG90 Screws (Comes With Micro Servos)
-2 3.54mm Screws (Very Random)
Here is the link to the YouTube Video for the tutorial: https://youtu.be/ACBPJDuTHo0?si=2AU3IHDwdz8QQmYl

ALSO THE NECK CANNOT KEEP HIS HEAD UP! EXTRA WEIGHTS WILL BE REQUIRED ON THE BASE

These are the settings I use for Cura Slicer, Also I use a Ender 3 V3 KE.

Infill: 20%

Supports: On

Support Type: Tree

Tagi