SpeedSource SLX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prints for the SpeedSource SLX
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
3d printed parts for the SpeedSource fpv frame.
speedsourcefpv.com
I print all parts facing up as they would sit on the frame. This appears to be the best way to get accurate camera angle off the fixed mount.
I usually print the camera mounts in Nylon 910 and then boil it for strength and flexibility. (I heat the water to a boil, turn the heat off, and put the part in for ~30min. (with the lid still on the pot). Message me for Nylon 910 print settings.
You can also print the camera mounts in TPU if you want.
Everything else I print in TPU - the antenna mounts can be a bit tight but should flex around the antenna.
Let me know if you have a camera or antenna that is not included, I will try and get a mount made for you!