Ultra Lightweight 18650 2S2P / 4S Battery Holder for Drones & RC Aircraft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight 18650 holder for 2S2P or 4S packs, optimized for drones, RC jets and high power builds.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
🔋 Ultra Lightweight 18650 2S2P / 4S Battery Holder
This is a lightweight 18650 cell holder designed for high performance applications such as:
• RC jets
• FPV drones
• Electric airplanes
• Robotics
• Compact high current battery packs
The design supports:
2S2P configuration
4S configuration
Tight cell spacing to reduce pack size
Strong mechanical support with minimal added weight
This holder is optimized for builders who want strength without unnecessary plastic mass. Perfect for high C-rate cells like Molicel, EVE, Tenpower, Ampace and similar 18650 formats.
✈ Why this design?
In RC aircraft and drones, weight is everything.
This holder reduces plastic volume while maintaining structural integrity during high G maneuvers.
Airflow gaps are included to improve cooling during high discharge flight conditions.
🖨 Recommended Print Settings
Material:
ABS (recommended for aircraft)
PETG
ASA
Layer height:
0.2mm
Walls:
3 perimeters minimum
Infill:
20–30% is enough
No supports required.
🔥 Designed by DIY500AMP
If you build one, share your setup.
Check DIY500AMP.COM for copper busbars and high current battery cells.