Dust Cover for EINHELL TP-PS 18/165 Li BL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Dust Cover to cover the hole where dust escapes when the hole is not covered with a Dust Cover.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dust cover for the Einhell TP-PS 18/165 Li BL saw.
I like the saw but thought I could improve on the dust collection a little.
This cover is meant to increase the suction when you put your shop vac to the exhaust - without the vacuum cleaner the dust will get everywhere and the cover will not help with that at all.
The cover clips into the hole on the side of the saw. There is a little recess towards the front that you can use to take it out - you might need to wedge a screwdriver in there to get it out.
I printed it with SUNLU PETG.
Print settings are not critical I guess.
There is a dust cover for a TE-PS-165 here on Printables, but the two covers are not interchangeable! Different saw!