Housing for Simple Handled Thermal Imager
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for "Simple Handled Thermal Imager" based on MLX90640
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a very basic thermal imager, and it's sold as just circuit boards assembled together.
I made a housing for it so I wouldn't have to worry about damaging the device itself.
The case halfs snaps into place.
Optionally, you can print a lens protector with twist-lock.
One of the pieces will need to be glued into the grooves on the front of the case
(The cover and case have slots so you can attach the cover with thin rope and prevent it from being lost)
Be careful. Not all devices have the same camera position relative to the board.
If you found my model useful, you can buy me a coffee