1 / 7
Allsky Focus Upgrade V3AF | V3 Allsky Camera | CS Lens | PiHQ | ZWO — zdjęcie 1
1 / 7

Allsky Focus Upgrade V3AF | V3 Allsky Camera | CS Lens | PiHQ | ZWO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

By popular demand: Remote focusing mechansim for Allsky V3 by ChrisE

Ocena
0 / 5
Polubienia
6
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License
Focusing Upgrade for V3 Allsky Housing Assembly

By popular request, here is a focusing solution for the V3 Allsky Housing design.

Fully compatible with the existing housing - this Focusing Sub-Assembly is contained within the camera cone design (PiHQ & ZWO).  Thickness of the gear set intended to avoid warpage and ensure heat resistance in all climates. Fits standard ⌀28mm CS lenses.

Classified as experimental whilst durability tests are completed.  User feedback welcome to further optimise the design and compatibility with commercially available lenses. Basic software commands linked below. Please see compatibility Table below.

Focus Assembly Group for 28BYJ-48 Stepper Motor

Just a Gimmick?

No.

Shopping List

Solution based on 28BYJ-48 Stepper Motor and ULN2003 Driver available from many online retailers, sold as a Kit.  This is the primary component of the focus set-up - check the following links as Example - Amazon.it Amazon.com.  Available through other resellers. 

M3 Screws and Inserts required for Assembly, as well as GPIO Jumper Wires for electrical connection to the raspberry pi board.

Requires...
Compatibility Table (@Mar25)

I welcome suggestions for any additional lens sizes to be evaluated - or adjustments to improve coverage of the commercially available lenses. Spur and pinion gear options included.

CS LENS

2.5mm (Ø28mm x ≈17mm)

2.8mm (Ø28mm x ≈17mm)

V3 PiHQ 

Printed & Tested

Printed & Tested

V3 ZWO

Designed from Drawing

Designed From Drawing

Python Scripts

Basic forward/backward and debugging commands uploaded to github

Motor driver requires 6 free GPIO pins on your raspberry pi (5V, GND, IN1-4)

Updates

4 Oct 26 - Increased spacing between gears. (Spur gear v3.6,reduced to 99%)

13 Mar 26 - incorporated compliant mechanism to secure tolerance match aganist 28mm CS Lens

4 Apr 2026 - Updated Shaft and Pinion to have Keyed interface to avoid slippage/over tightening.  Options for an M3 and M2.5 screw fixation of Pinion & Shaft included.

4 Apr 2026 - Included .Step File of Pinion, Gear and Shaft

Tagi