Modular Edge Trainer – 10 / 15 / 20 / 35 mm (100kg+ Tested)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4-edge 3D printed climbing trainer (10–35mm). PETG, 60% infill. Holds 100kg+, up to 150kg tested.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Take your finger strength to the next level with this modular 3D-printable edge trainer, designed for progressive climbing training at home or in the gym.
This compact edge block features four precision edge depths:
10 mm – Micro edge for advanced finger strength
15 mm – Small edge for power & contact strength
20 mm – Standard training edge
35 mm – Jug-style edge for warm-up & endurance
Perfect for hangboard sessions, max hangs, repeaters, or rehab-focused training.
🧱 Built for Strength
✔ Printed in PETG (recommended)
✔ 60% infill for high structural integrity
✔ Tested to hold 100 kg+ bodyweight
✔ Designed with safety margin – capable of ~150 kg+ when printed correctly
✔ Can also be printed in PLA (PETG strongly recommended for durability & temperature resistance)
🖨 Recommended Print Settings
Material: PETG (PLA optional)
Infill: 60% or higher
Walls/Perimeters: 4–6 walls recommended
Layer height: 0.2 mm
Print orientation: Flat on back for maximum layer strength
No supports required
⚠ Always inspect your print before use. Climbing training equipment is used at your own risk.
🎯 Ideal For
Progressive finger strength training
Home wall setups
Portable warm-up tool
Rehab & controlled loading
Climbers from intermediate to advanced
If you download and print it, I’d love to see your make! 💪