P1/P3 Hardline Cable Center Conductor Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to tell the difference between P1 and P3 cable. 500, 750, and 1000 cable size. +/- 0.02mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Use to tell the difference between P1 and P3 cable. 500, 750, and 1000 cable sizes. Based on old metal gauge. +/- 0.02mm tolerance.
P1 cables have a slightly smaller center conductor than P3 cables, leading to opens/shorts in the cable plant if the wrong connector type is used. Use this gauge to determine which version you are working with. P1 is solid copper, P3 is copper clad.
make sure your first layer has the same layer width as all the other layers to avoid elephant footing. If your first layer is a bit large, you may have to gently trim in, or it may be deceptively snug.
I used hyper-petg for mine, but pla would work fine.