Refrigerator Drawer Support for Kenmore Refrigerator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement drawer support part. (This should also fit other Refrigerator models that use this specific part.)
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This small part supports the bottom drawers (often referred to as "crisper drawers") for many brands of Refrigerator. I'm using this in a Kenmore, though cursory research suggests the same part is used in several other models.
The small Retaining Peg that accompanies this is gently tapped into the hole — this will slightly seperate the four segments on the back (that go into the wall), to help secure the part.
I had good results printing this in PETG with five perimeters and 50% infill. (More infill isn't necessary, as it only fills the circular "face" rather than the parts that have to support weight.)