Oculus Touch Controller Command Strip Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the way this mount looked and held the controllers but didn't like the idea of actually screwing it to the…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
I liked the way this mount looked and held the controllers but didn't like the idea of actually screwing it to the wall so I removed the screw holes and added a small channel for 3M Command Strips.
I used one of the large sized, 5lb capacity Command Strips (https://www.amazon.com/Command-Refill-Strips-6-Strips-17023P-ES/dp/B000FCGS5Y/) to hang mine.
Remixed from: https://www.thingiverse.com/thing:2135903
Print Settings
Printer Brand:
PowerSpec
Printer:
Duplicator I3 PLUS
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.1
Infill:
50%
Category: Computer