MAGNETIC Core ONE Vent Flaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Vent Flaps to Cover the Exhaust Fan Outlets of the Core ONE.
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 187
- Wydruki
- 12
- Wyświetlenia
- 1167
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Please download the flaps from the original model.
This remix uses magnets instead of screws to mount the vent flaps. The model is compatible with following round magnets. If you need another magnet please let me know.
5x2, 5x3
6x2, 6x3
8x2, 8x3
10x2,10x3
To print this model please use a 0.2mm layer height. Use the model which fits your magnet size. The holes are 0.2mm bigger than the magnets to make a snug fit.
Insert a pause in the slicer at following heights to insert the magnets:
2mm magnet: layer 13 -> 2.6mm
3mm magnet: layer 18 -> 3.6mm