Dodgy Arcade2TV-XR Touch Panel Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This guard makes it a little harder to accidentally press buttons on the X-Arcade Arcade2TV-XR touch panel.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The touch panel on the X-Arcade Tankstick-VR/Arcade2TV-XR is really easy to hit by accident. You can reach for something past it (like the controls of the haptics kit) and press buttons just by brushing your arm against it. If you use it with VR, you might be gropping around for one of the start buttons. Either way this should help and give you an easily recognizable shape in VR.
There are two versions. There's one that just adds a raised frame to make it harder to accidentally bump the touch controls. The other adds a hinged lid in case want to make SURE no-one bumps your buttons!
No supports needed for the frame version. It fits around the player start buttons pretty well, but it might benefit from some double sided tape to help hold it down.
You might need supports for the version with the lid, depending on how good your printer is at bridging. In my case it was cleaner with supports and they pretty much just fell off the print. Also, consider your infil when printing the cover. The LED lights shine through my white PLA and I really like the glowing pixelated look of my grid fill.
Inspired by a request from chisel316 on the Pinball FX Discord channel.
Update 08/17/26: I added a recessed area to "Arcade2TV-XR Touch Panel Guard Flip Top". The buttons are so sensitive that that are sometimes still activated even through the plastic. The new 1mm recess prevents the flip top panel from even touching the buttons.