Snail tape holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tape holder/Dispenser for Small Sellotape reels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Had a lot of fun making this very easy and simple snail tape holder.
25mm barrel for small Sellotape reels
I had a load of fishing lure eyes laying around so added some with a blob of super glue. Makes me chuckle.
I first printed the cutting edge too using PETG for the whole thing at 30% infill. 15% was too brittle.
The cutting edge did not work as it was not sharp enough.
So this version has a pilot hole for a threaded insert to be added with a soldering iron or your method of choice. I hold mine over the hob with pliers then press in with a screwdriver. I suggest this is not the safest method! Do not cause a fire or burn yourself. Handling hot items is dangerous.
The purpose of this is to then cut up a small piece of an instant coffee can to fit between the eyes and cut a zig zag tooth pattern into it. Drill the whole to centre to the thread and secure with a single appropriately sized bolt/screw.
The metal edge needs to be just JUST past the lip of the plastic to work as a cutting edge and not simply bend out of shape immediately.
I do suggest you paint yours and upload snail pattern variations. Best pattern gets bragging rights!