Fixit System Scanning/ Videography turntable For Smaller Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of Chris Borge's Scanning Turntable to be compatible with smaller printers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: I HAVE NOT PRINTED THIS MYSELF AND DON'T KNOW IF IT WORKS BUT IT SHOULD
This is a modification of Chris Borge's Scanning Turntable and has been modified to work on smaller printers.
I have a Creality K1 and all prints fit on this. Some prints may only work on their own and at an angle to fit.
All parts can be joined together via glues or plastic welding.
There are 3 different variations of the main body for peoples different preferences.
"Main Body in 4" - Main Body split into 4 parts, quite large and needs bolts for the V wheels.
"Main Body in 4 no V" - Main Body split into 4 parts, quite large but doesn't need bolts for V wheels and doesn't need any "M5 Spacer". Less printing time but will need a little more concrete.
"Main Body in 6" - Main Body split into 6 parts, not too big and needs bolts for the V wheels.
"Large Fixture Plate Top" - Has been designed to be held together with 2mm x 30mm Slotted Split Pins but 2mm steel dowels can be used as well. Glue should also be used but the fixture plate ring could hold it in place but haven't tried myself.
I noticed on the original that people wanted the dimensions of the lazy susan so I have included them here.
If there are any issues people notice, feel free to comment about them and I will look into it when I have time.