1 / 3
12V PC Fan Sausage Dryer / Air-Drying Chamber (Simple DIY Food Dehydrator) — zdjęcie 1
1 / 3

12V PC Fan Sausage Dryer / Air-Drying Chamber (Simple DIY Food Dehydrator)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact air-drying chamber powered by a standard 12V PC fan. Hang sausages on a bamboo skewer

Ocena
0 / 5
Polubienia
5
Pobrania
7
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A compact 3D printed air-drying chamber powered by a standard 12V PC case fan. The fan pushes air into the chamber and it exits through the perforated top, providing steady airflow around the product.

To hang the sausage inside, drill two small holes on opposite sides of the cylinder and insert a bamboo skewer / BBQ stick through them.

Parts

  • Main cylinder body

  • Perforated top lid

  • Fan mount / bottom stand

Print settings (suggested)

  • Material: PLA

  • 0.2 mm layer height

  • 3–4 perimeters, 15–25% infill

  • No supports needed

Notes / safety

This is meant for airflow during drying/casing work, not high-temperature dehydrating. Keep everything clean and use food-safe practices (and food-safe materials if you’re strict about it).

Tagi