Hoover CleanSlate spray trigger seal replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hoover CleanSlate trigger piston TPU seal fix
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
The original nozzle trigger/piston mechanism on my Hoover CleanSlate stopped spraying properly and would only drip. Grease was not a real fix, and in my case it was not needed at all. The real problem seems to be the original rings: for some reason, they do not slide well against the surface and tend to bind up, so the button stops moving properly in either direction.
I designed simple replacement rings and printed them in TPU 95A. Unlike the original rounded rings, these have a flat profile, and they work much better. After installing them, the trigger moves smoothly and consistently, like it should — up, down, up, down, just like a proper trigger. It now sprays normally again.
I personally use the 11.4 mm version, but I also attached an 11.6 mm version just in case.