Hueforge - Spider Noir - 2 Filaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two color Spider Noir artwork made with Hueforge.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
INFO
A two color Spider Noir artwork made with Hueforge. I used black Elegoo PLA and Polymaker PolyTerra Cotton White.
There are two versions of the model. One with a 2mm base thickness and one with a 3mm base thickness. The 3mm version is more strudy and might be better for certain usecases.
Image Source:
https://wall.alphacoders.com/big.php?i=1404159
PRINTING
For 2mm base version:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 2mm
The Max allowed Thickness is 3.76mm and the Actual Thickness is 3.28mm
#000000 PLA Elegoo Black Transmission Distance: 0.1
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #25 (2.16mm) swap to Cotton White for the rest.
For 3mm base version:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 3.04mm
The Max allowed Thickness is 4.8mm and the Actual Thickness is 4.32mm
#000000 PLA Elegoo Black Transmission Distance: 0.1
#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #38 (3.2mm) swap to Cotton White for the rest.