Quick-change toolholder, AXA QCTP 250-111 250-101 for WM210.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printed with ABS plastic, 15% infill. You can print with other plastics as well; there will be less shrinkage.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Размеры посадочного места на картинках.
Печатал АБС пластиком, заполнение 15 процентов.
Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее
Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.
2 модели, правая и левая, например правую использую для разточного резцедержателя.
так же и винтики 2 модели, для правой и левой, для правой с левой резьбой.
____________________________________________________________________
The footprint dimensions are shown in the pictures.
I printed with ABS plastic, 15% infill.
You can print with other plastics as well; there will be less shrinkage, but the print will simply fit tighter.
Quick-change toolholder, AXA QCTP 250-111 250-101 for WM210.
There are two models, right and left. For example, I use the right one for a boring tool post.
There are also two models of screws, one for the right and one for the left. The right one has a left-hand thread.
