Impossible Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Impossible Nut is a print in place bolt with two ends that can not be removed but the nut on the bolt spins freely.
- Ocena
- 4,917 / 5
- Polubienia
- 81
- Pobrania
- 433
- Wydruki
- 16
- Wyświetlenia
- 10 679
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
The Impossible Nut is a print in place bolt with two ends that can not be removed but the nut on the bolt spins freely. The nut will need support when you are printing it. I allowed for tolerance of the print but if you are printing the nut a different color than the bolt you will have to figure out the placement up the bolt yourself. The pitch is 1/8th but check your slicer preview to make sure the nut is not hitting the bolt during your print.
This is a video on how to create your own threads in onshape. (Reddit post that has a gif of it working https://www.reddit.com/r/3Dprinting/comments/twulgf/the_impossible_nut)