Padel Vibration Damper (Shockout Absorber)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimise injuries, maximise courttime. TPU Vibration damper for padel rackets, with remover.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
TPU Printable Shock Absorbers for Padel Rackets
Upgrade your comfort and performance on the court with these custom TPU shock absorbers designed for padel rackets. Engineered to minimize the transfer of vibrations from the racket to your arm, this dampening system helps protect your elbows from long-term strain caused by repeated impact—so you can play harder, longer, and pain-free.
By absorbing unwanted vibrations at the source, these dampeners enhance shot comfort and feel, reducing stress associated conditions like epicondylitis (tennis elbow) and tendonitis (wrist strain/inflammation). The result is a smoother, more controlled response on every hit with less injuries and more courttime.
Key Benefits
Vibration Reduction: Limits shock transfer to your arm for greater comfort and joint protection
Injury Prevention: Helps relieve and prevent tennis elbow and similar overuse injuries
Custom Performance: Fine-tune control and power by adjusting placement on the racket
TPU Optimized: Designed specifically for flexible, durable TPU printing
Easy Removal: Includes a dedicated extractor tool for quick installation and removal
Perfect for players seeking a personalized, performance-enhancing solution. These TPU-printed shock absorbers combine innovation, comfort, and practicality in one accessory.
Usage
Each absorber weighs 0.8 grams. You will need 2 for each hole, 1 for the front face, 1 for the back.
Decide where to place and space them, closer to the handle results in more control. Further to the top off the racket improves power.
Simply push them in and repeat on the other side, same hole. They are made to fit most standard holes (+-12mm). The brim is made slightly bigger so the dampers stay in place.
Removal
Use the provided remover
Insert it into the little slot of the damper
Pull and twist gently
TPU printing tips
Lowest temperature recommended (look at your spool)
Retraction length 2mm
Retraction speed 20mm/s
Part cooling 30% (off for first layer)
Print speed 20mm/s