Ontos pivot sear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
changed the Ontos catch style to a pivoting sear-catch for a lighter trigger feel.
- Ocena
- 4 / 5
- Polubienia
- 37
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1077
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added files for regular ontos as well. These are experimental as I have not tested these.
_________________________________
I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs.
The plunger head, catch, catch spring rest and the back section have been reworked to work with a caliburn-crush style pivoting sear-catch. The new trigger is based on crush and the sear is based on a caliburn style geometry. The centre right section has been adjusted to accomodate the new trigger.
The back section has also been filets to remove any sharp edges.
Redesigned the plunger head to have a tpu-pla hybrid variant. can just be slotted together and glued.
Additional hardware needed: 2xM3 25mm screws for the trigger and sear. 1.2cm long 4mm spring for the sear actuation.
The remaining parts from my previous remix are still valid:
Thanks to Taffy and his discord group in suggesting corrections during design