AP900/1000 /Air Venturi Alpha Cheek Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Taller versions of the stock cheek riser (+5mm, +10mm, +15mm) that use the standard fixings.
- Ocena
- 0 / 5
- Polubienia
- 12
- Wydruki
- 0
- Wyświetlenia
- 678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Customise the fit of your Snowpeak AP900/ 1000/ Air Venturi Alpha with this selection of cheek risers that give an additional 5, 10 or 15mm of height for the ideal cheek weld for your chosen scope.
All versions attach using the standard hardware.
The models are oriented on end for the best print fidelity and will print without support, although I'd recommend a nice wide brim for stability and bed adhesion. 0.2mm layer heights will give good results.
The stock version is pictured alongside and available as a free download along with a printable version of the stock forend.