Wyze Pan Wall Mount 45 deg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are many wall mounts for the Wyze Cam Pan, I just needed one that was angled so I can mount it high and see the…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
There are many wall mounts for the Wyze Cam Pan, I just needed one that was angled so I can mount it high and see the whole room.
It has a relatively small hanging hole, I hung mine on a finishing nail. You will need a 1/4" nut and bolt to attach to the bottom of the camera. Chances are you will not find a bolt short enough to tighten the camera to the base so the nut will allow you to bottom out the bolt then tighten up to the base.
The USB cable is secured to the base using a zip tie to prevent stress on the connector. So far the camera has been surprisingly stable and balanced.
Most parts are about 4mm thick, base is about 2" in diameter (in case you want to use it for other cameras with tripod thread)
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Filament:
Inland PetG
Notes:
Print it standing as shown in the screen shot. No support necessary.
Category: Camera