1 / 3
Snap fit remix of the Display Stand for knives
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw that the original needed screws and so, I decided to make it 100% 3D printed using a snap fit design!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw that the original needed screws and so, I decided to make it 100% 3D printed using a snap fit design!
I also made magnet holes for smaller magnets but you dont need to use magnets at all.
