Roxon Titan USB+MicroSD Holder

Allows your Roxon Titan to hold a USB drive and MicroSD card, without costing any implement slots! It uses the same USB drive mount as my 1-slot USB-holder implement, so you can swap the USB between either one. The tool is designed to securely clip closed when not in use.

Do Note: while attached, this mod does block use of long implements in the Titan. It also blocks use of certain full-length short implements in the 6th implement slot specifically; these implements include wirestrippers, extendable ruler, diamond file, short-scissors, and possibly other tools that use the full length of the short slot (simply store those tools in any of the other five slots). I've added a version without the MicroSD holder, which should allow you to fit a long-implement in the 5th slot.

I recommend printing the split-holder and gluing the pieces together. PC filament is highly recommend; PETG might work as well. I don't recommend PLA as it likely won't be durable enough, and ABS/ASA may prove too brittle for the thin walls. Parts of this model do get pretty thin! I recommend 0.10 layer height and 100% infil.

For the USB Mount, I strongly recommend PC filament! The design is meant to use specific extra-small USB drives such as this: https://a.co/d/1OIQGg3. The USB drive actually has a thin plastic cover glued on the top, gently pry that cover off, then superglue the drive into the USB Mount, making specific point of getting glue on the sides as well (this helps reinforce the design).