1 / 4
40mm Aluminum Extrusion TPU Feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squishy feet (TPU/FLEX) for printers with 40mm aluminum extrusion.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (25)Powiązane
I made a standalone mod for the CR10S, and needed to raise the height. These feet are compatible with any printer that has 40mm wide extrusion on the bottom of the frame.
Recommended Print Settings for the Feet (can increase values to decrease squish)
- 5% infill
- 2 perimeters
Required Hardware
- 16x 20mm M5 Bolts
- 16x M5 T-nuts
- 4x 40mm M5 Bolts