1 / 4
towing bracket for rc airplane.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a banner I wanted to tow with my rc plane, so I designed these hook up points for the back of the plane.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
these brackets are designed to be screwed on with one screw and then use glue to keep them aligned.
the brackets were printed on the small face, to keep the amount of supports down. they were printed out of PLA
the servo is mounted to the bracket with glue and the arms need to be trimmed in order for it to fit.
(I have not printed the bracket with the servo mount, so proceed at your own risk)