Rivian Cargo Crossbar Mount for NMO cables
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metal plate fit for Rivian R1T/R1S's "cargo crossbar" mounting points on bed/roof. Hole for 3/8" NMO mount, and M8 slot.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I created this mount in Tinkercad to allow me to add a very strong, low-profile, aerodynamic radio antenna to a Rivian R1 vehicle. You need something like the Megawatt cargo crossbar adapter, or something else that mounts to the crossbar eyelets on the vehicle and provides a flat surface to mount the plate on, raised about 13-15mm. A standard low-profile 90 degree NMO cable mount should then sit comfortably on the plate, while the plate is affixed to the adapter.
Note that NMO mounts come in 3/4" and 3/8" varieties. This is made for 3/8" (specifically a Midland MXTA24) and if you get a 3/4" mount, you may need to space up the round hole by a few mm to fit. I printed the plate in 304 stainless steel at 3.2mm thickness, this is VERY solid and doesn't flex, but may be slightly too thick for a standard "vehicle rooftop-install NMO mount."