1 / 2
Wire-spoked wheel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Featured as a sample project in the Prusa Academy Fusion 360 online course.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sample project in the Prusa Academy Fusion 360 online course.
It was quite difficult to get the spokes into a reasonably good position.
I needed a second attempt, and it took me much longer than 1-2 hours, but it was good practice. 😄
I also can recommend the course even if you used Fusion 360 before.
I added two .3mf files with prepaintet supports and settings for snug (faster) / organic support.
I used the .15 balanced profil and it worked pretty well, both of them.