90-degree Helical Gear Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easier to print version of Helical Fidget Gears
- Ocena
- 4,4 / 5
- Polubienia
- 151
- Pobrania
- 556
- Wydruki
- 4
- Wyświetlenia
- 2078
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my take on Andrew Deml's gear fidget. I changed the axel holes in the body to be square, or diamond shaped and made the axels have the same ends. I also remodeled the body to allow for printing without supports. I used a brim on the pins and body for stability but did not on the gears. I recommend the chamfered gears but included the square edge ones if that is preferred
I have added a body piece with more side clearance and a chamfered gear with more clearance on the axle hole to hopefully address issues some people had with the gears not turning freely. I have printed a few that needed to wear in a bit to spin freely and one that had a bit of plastic that had to remove with a file.
The gears in this make are a 40 tooth, 20 degree pressure angle, 32 pitch with a 45 degree helix, if anyone is curious.